Open the trunk. There is a rectangular cut out in the metal plate to the right of the brake light. Next to the cut out there is a plastic pin holding the harness above the metal plate. Push it through the hole to loosen the harness. Reach through the rectangle metal cut out to pull the harness through the opening.
MODULE TYPE:
REGULAR
There are 3 types of Brake Plus modules: Regular, Black Stripe, Red Stripe
Positive Wire:
Violet/White
Ground Wire
Black
Additional Information:
None
SEE ANOTHER GUIDE:
Troubleshooting:
Are you having issues with installation? Check out our troubleshooting guide for common errors associated with the installation of Brake Plus.