Open the trunk lid. Remove the pin from the trunk lining on the driver side. Pull the cover to the side. The wires will be in the harness running into the trunk lid. There is one violet/white wire and two violet/gray wires in the harness. Be sure to grab the violet/white.
MODULE TYPE:
REGULAR
There are 3 types of Brake Plus modules: Regular, Black Stripe, Red Stripe
Positive Wire:
Violet/White
Ground Wire
Black
Additional Information:
None
SEE ANOTHER GUIDE:
Troubleshooting:
Are you having issues with installation? Check out our troubleshooting guide for common errors associated with the installation of Brake Plus.